|AOG's Pilot Tip for January|
|Written by PilotWorkshops.com|
|Monday, 17 January 2011 09:45|
“How do I stay ahead of the airplane?” I am a CFI, and I find that this question or issue often comes up after a student has learned the basics of aircraft control. Do you have any tips that could help as a student progresses from beginner to master of the aircraft? – Mike M.
Wow, that is a question we all work on. Each of us has a limited capacity to process and fly. Sometimes, the tasks required exceed the capacity available. That’s when the airplane starts to get ahead of us, or, in other words, we start to get behind the aircraft. Our goal is to keep the task level below our capacity. Easier said than done, but here are a few suggestions.
1. We can move some tasks to a less-busy time.
2. We can build in more time to complete the required tasks.
3. We can simply eliminate some tasks.
For example, good pre-flight planning and organization is an example of moving tasks to a less-busy time and will significantly reduce our in-flight workload. Having the taxi diagram available prior to calling for taxi clearance is another good example. On the other hand, trying to read the AFD to confirm destination traffic patterns while on final descent is a poor choice of priorities. Recently, airlines, corporate and military, have reviewed taxi procedures to see if they could move any checklist items from taxi to prior to gate departure in an effort to avoid runway incursion issues.
How can we make more time to get the tasks done? We can slow the airplane down. We all know that the traffic pattern and approach are a very task-saturated time. It’s a place where we can easily get behind the airplane. If we slow the aircraft down prior to this phase, we have automatically given ourselves more time to complete the required tasks. If on IFR, and you are starting to get behind, you can ask ATC for delaying vectors or a turn in the holding pattern. Then, of course, you can always go around. All of these are ways we can make more time.
What do I mean when I say, “We can simply eliminate tasks?” We all know the adage about aviate, navigate, and communicate. This means that we always have to prioritize our workload. For example, responding to a radio call just at touchdown would not be a good idea. Just eliminate that task until the aircraft is slowed to taxi speed. When conducting training, I often give pilots a go-around command in or near the flare for landing. It is not uncommon for the pilot to first tell the tower that he is going around and then finally get around to adding the power. Announcing the go-around to the tower is a task that can be eliminated until we have established the go-around properly. So, if you are starting to feel a little overloaded, you may be able to toss a few tasks on the back burner for the moment. Just don’t toss the aviate tasks away, only the navigate and communicate.
So, the next time you have one of those situations where you wind up being behind the aircraft, think about how you could have moved some tasks to a less-busy time, eliminated tasks, or provided yourself more time. Then implement those changes on your next flight. – Wally Moran
Wally Moran is a retired airline captain and spent much of his career as a training instructor and check airman on aircraft, including the Boeing 747 and 767. He has held a flight instructor certificate for more than 47 years. Wally is a designated pilot examiner for single- and multi-engine aircraft and gliders. He is authorized to issue certificates all the way up to ATP and has given over 3,400 hours of flight instruction in single-engine, multi-engine, tailwheel, gliders, seaplanes, and instruments.
Subscribe to PilotWorkshops Tip of the Week and get free weekly tips from Wally and the rest of the company’s team of award-winning experts at http://www.pilotworkshops.com/freetips.
|Last Updated ( Monday, 17 January 2011 09:59 )|