- Index
- » General Forums (Open to the public)
- »
- » takeoff roll
takeoff roll
takeoff roll
I have a 68' Cessna 177 and as I start my takeoff roll and get some speed the plane starts to like wheel hop to where as I get to rotation it all most hops off the runway. It does not track/roll straight any more. Would a over inflated or a front strut that has extended to far cause this to happen.
Any advise would be greatly appreciated.
- Guest
- Guest
-
-
- Posts
-
Re: takeoff roll
Brian
Had the tires been replaced? Are tires wearing evenly?
Have you serviced the nose strut per service manual instructions. Nose wheel tire pressure 30 Psi (up to s/n 0854) or 35 PSI (0855 & up) main gear at 30 PSI. Nose gear strut pressure (strut extended) 50 Psi thru S/n 0854 40 Psi s/n 0855 & up. Also have you checked main landing gear, that nothing loose and leveling (plane sits level), eccentrics in proper place.
Bill
- Guest
- Guest
-
-
- Posts
-
- Index
- » General Forums (Open to the public)
- »
- » takeoff roll
Board Info
- Board Stats:
- Total Topics:
- 5964
- Total Polls:
- 1
- Total Posts:
- 16301
- Dormant:
- User Info:
- Total Users:
- 2065
- Newest User:
- TERRY MCFARLAND
- Members Online:
- 0
- Guests Online:
- 2181
- Most Active Users:
- Director, jplaxton00, helpdesk, reecedaniel, Cessna Tech, Larry Stanford, Rick Gardner, Bob H, wrbrent, mike11003
- Online:
- There are no members online
Forum Legend:
Topic
New
Locked
Sticky
Active
New/Active
New/Locked
New Sticky
Locked/Active
Active/Sticky
Sticky/Locked
Sticky/Active/Locked