help with 300a autopilot

help with 300a autopilot

Okay I need some help in finding the right instruments to go with my Cessna 300 AP it turns out long before I got my plane the previous owner had to replace some of the instruments and it seems it was all of the ones that connect to the AP. My avionics guy verified that all the plugs were neatly tied back and I have the wrong instruments. My goal is to find the right ones and get the ap working again.

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

I can not answer  your question about instruments but I have a complete 300 for sale , if you need parts I have all of the servo's and boxes.  I sold the cessna befor I could instal it .  I will be glad to give you a great price if  ;you are interested.

Thanks
Marc
210-725-1238

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

Did you sell the autopilot?  Mine is broken, and not yet diagnosed, but I could be looking for some parts.  Maybe I could buy the whole thing--price?

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

Hi, if you still looking, you need a G-502A or possibly B directional gyro (unlikely). The b model is slaved.  Then you will need a G-300A rate gyro.  I got mine from aircraft quality instruments, they were happy taking my old ones as cores.  But if you have good 'cores' you may be better selling those.  There are other options, like a NSD360 HSI, but that requires some modifications to the autop[ilot computer.  I have a Cessna autopilot book if you are interested. Don

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

Shaun, there's one on ebay at present.  Don

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

Thanks I am currently bidding on one but I may get it through wentworth they have quoted me very well. I have been told to only look at edo and sigmatek

Shaun Vanbergen
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

Shaun,
I too, have a used Cessna 300 auto pilot that was removed from my 1977 182 and it worked well It was a single axis and I will sell at a good price if you are interested.
Danny

Danny Morgan
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

anyone still have a 300a autopilot for sale. Im intrested too. 561-445-7126

Bill

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

Hi Shaun,

You may not need to replace all of your instruments previously removed. Reading your post indicates to me that when the instruments were removed previously the connectors were capped/bagged and stowed and all new wiring was run to these instruments in question. In some cases, it is possible to re-incorporate the old wiring harness with the new. If the indicators that you have now have outputs to drive an autopilot and your autopilot is looking for the same type of signal on it's input pins, then all you need to do is remove the appropriate wires from your cap and stowed connectors and incorporate them into your functioning wiring harness.

Regards,
Randy Wilson
This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

I am currently looking for a used Autopilot for a 1962 Skylane. The panel was completely redone in 2005 by Cheif Aircraft. I lack the $15,000 dollar needed to buy and install an S-Tek autopilot. What is an affordable alternative for this aircraft?

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

Hi I am looking for parts for a Cessna 300A auto pilot if any one has some please phone me collect at 506 643 1718. Thanks Rob

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

I'm loking for servo for my 1963 182 cessna autopilot. 217-439-7284

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

Looking for cessna 300a autopilot system for my c182p
anyone nout there have or know of one?
Thanks
Bill

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: help with 300a autopilot

Hi Bill,

I have info on the 300A Call me at 305-798-4966

Bill

1940bill
useravatar
Offline
13 Posts
User info in posts
Only registered users or members can reply or post

Board Info

Board Stats:
 
Total Topics:
6026
Total Polls:
1
Total Posts:
16346
Total Posts Today:
1
User Info:
 
Total Users:
2400
Newest User:
Rsterlin
Members Online:
2
Guests Online:
2030


Forum Legend:

 Topic
 New
 Locked
 Sticky
 Active
 New/Active
 New/Locked
 New Sticky
 Locked/Active
 Active/Sticky
 Sticky/Locked
 Sticky/Active/Locked

ankara escort ankara rus escort ankara escort bayan ankara bayan partner ankara escort kizlar escort ankara ankara escort ankara eskort ankara escort bayan ankara bayan partner ankara escort kizlar escort ankara