Removing my old ADF

Removing my old ADF

When I had my 1968 182 panel upgraded last year, my airplane lost 26 pounds even after getting a new Garmin and backup Narcos. I should have removed the old Bendix ADF then. But I am ready to do it now myself. I am an A&P but can not find wiring diagrams for this particular installation. Can anybody help with what to look for or if there is a 337 requirement for a complete removal or can it just be noted on the weight and balance and log book? Where is the power supply for it typicaly? this is a 182L. and the radio has a tuning dial instead of the specific ADF frequency selector. I have a feeling the airplane will start floating and will need to be tied down tighter after I remove this old radio. I'll miss the Baseball games in flight though....

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: Removing my old ADF

removing the boat anchor is not a major modification so no 337 is needed.  you will need to wiegh all the stuff you remove and fill out a new weight and balance as well as update the equipment list for the airplane.

as far as I know the ADF is just antenna, cable, power and ground wiring.  this should be simple enough to figure out by tracing the wires from the back of the radio.

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Board Info

Board Stats:
 
Total Topics:
6045
Total Polls:
1
Total Posts:
16356
Dormant:
User Info:
 
Total Users:
2556
Newest User:
d575757@yahoo.com
Members Online:
0
Guests Online:
4483

Online: 
There are no members online

Forum Legend:

 Topic
 New
 Locked
 Sticky
 Active
 New/Active
 New/Locked
 New Sticky
 Locked/Active
 Active/Sticky
 Sticky/Locked
 Sticky/Active/Locked

ankara escort ankara rus escort ankara escort bayan ankara bayan partner ankara escort kizlar escort ankara ankara escort ankara eskort ankara escort bayan ankara bayan partner ankara escort kizlar escort ankara