Cessna: 172S; Worn Aileron Control Cable; ATA 2710

Cessna: 172S; Worn Aileron Control Cable; ATA 2710

During a 100-hour inspection, a mechanic found a “flat spot” on the L/H aileron crossover cable. The defect occurred at the aileron cable abrasion strip attached to the rib assembly at wing station 71.19. Further investigation found the cable beginning to fray. This defect’s cause is determined to be from wearing on the abrasion strip. “To solve this problem, I think the abrasion strip should be lowered or a pulley installed.” (The abrasion strip P/N is 0523233-3. The stainless steel control cable P/N is 0510105-364.)

Part Total Time: 2,065.8 hours.

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Board Info

Board Stats:
 
Total Topics:
6047
Total Polls:
1
Total Posts:
16359
Dormant:
User Info:
 
Total Users:
2568
Newest User:
jonespublabs
Members Online:
0
Guests Online:
1729

Online: 
There are no members online

Forum Legend:

 Topic
 New
 Locked
 Sticky
 Active
 New/Active
 New/Locked
 New Sticky
 Locked/Active
 Active/Sticky
 Sticky/Locked
 Sticky/Active/Locked

ankara escort ankara rus escort ankara escort bayan ankara bayan partner ankara escort kizlar escort ankara ankara escort ankara eskort ankara escort bayan ankara bayan partner ankara escort kizlar escort ankara