- Index
- » Members Only Content (COO membership required)
- » Aviation Alerts
- » Cessna: 402C; Worn Aileron Control...
Page:
1
Cessna: 402C; Worn Aileron Control Cable; ATA 2710
Cessna: 402C; Worn Aileron Control Cable; ATA 2710
“Cable is blended at pulley,” states the mechanic. “The probable cause is the softer, new style stainless steel cable material. The service life is only a fraction of the old style steel cables.” The blending defect was found on the forward cable (P/N 5000008-95CR) of the L/H wing at the middle pulley.
Part Total Time: (unknown).
- Guest
- Guest
-
-
- Posts
-
Only registered users or members can reply or post
Page:
1
- Index
- » Members Only Content (COO membership required)
- » Aviation Alerts
- » Cessna: 402C; Worn Aileron Control...
Board Info
- Board Stats:
- Total Topics:
- 5964
- Total Polls:
- 1
- Total Posts:
- 16301
- Dormant:
- User Info:
- Total Users:
- 2065
- Newest User:
- TERRY MCFARLAND
- Members Online:
- 1
- Guests Online:
- 1763
- Most Active Users:
- Director, jplaxton00, helpdesk, reecedaniel, Cessna Tech, Larry Stanford, Rick Gardner, Bob H, wrbrent, mike11003
- Online:
- Gerald Morgan
Forum Legend:
Topic
New
Locked
Sticky
Active
New/Active
New/Locked
New Sticky
Locked/Active
Active/Sticky
Sticky/Locked
Sticky/Active/Locked