ECI: Cylinder; Blown Cylinder Head

ECI: Cylinder; Blown Cylinder Head

<p><strong><font color = "blue">ECI: Cylinder; Blown Cylinder Head; ATA 8530</font> </strong></p>
<p><em>(A Cessna 402 airplane is “attached” to this TSIO-520E Continental engine.) </em></p>
<p>An A&P mechanic writes, “The number three cylinder on the left engine cracked completely around the head, approximately 1.25 inches above the base of the head. The crack was completely around the circumference of the head, and allowed the head to slip off the barrel half and inch. <em>(Having occurred during flight...), </em>the prop was feathered, the engine shut down, and a safe landing was made. There was no other damage to the engine or aircraft. This cylinder was on its third run. It had been previously re-barreled and bored .010 oversize at the last overhaul <em>(Cylinder P/N ECI 87721-06). </em></p>

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Board Info

Board Stats:
 
Total Topics:
6026
Total Polls:
1
Total Posts:
16345
Dormant:
User Info:
 
Total Users:
2399
Newest User:
LANCECASPER
Members Online:
1
Guests Online:
1730

Online: 
Bob H

Forum Legend:

 Topic
 New
 Locked
 Sticky
 Active
 New/Active
 New/Locked
 New Sticky
 Locked/Active
 Active/Sticky
 Sticky/Locked
 Sticky/Active/Locked

ankara escort ankara rus escort ankara escort bayan ankara bayan partner ankara escort kizlar escort ankara ankara escort ankara eskort ankara escort bayan ankara bayan partner ankara escort kizlar escort ankara