- Index
- » Topic Specific Forums (COO membership required)
- » Avionics
- » WING LEVELER
WING LEVELER
WING LEVELER
I have a 78 Cessna 172N. Want to add a wing leveler (minimum) or an AP of some type. ALSO would like to get my Lowrance 2000 panel mounted. Can anyone recommend a good avionics shop that won't rip my head off, yet does good work.
I am in the DFW area, but am willing to fly to a good shop.
I also want to get the Loran removed.
Thanks
Rick
- Guest
- Guest
-
-
- Posts
-
Re: WING LEVELER
Rick,
I am based in Jacksonville Texas and I use Avionics Unlimited 936-788-7336. They are located at Lone Star Executive Airport near Conroe and do excellent work at reasonable prices. I hope this helps.
Reece
- reecedaniel
-
-
- 117 Posts
-
Re: WING LEVELER
Hi Rick;
I also have a 1978 C-172N and would like to put a Navomatic 300A in it. However, when I looked into the installation cost, I discovered that it would require making some significant modifications to the wing to install the servo unit, not to mention the cost of installing the instruments and connections to the VOR indicators. I would be very interested in hearing what kind of estimates you get for installing a system in your aircraft, as I am probably looking at the same costs.
Thanks
Jon
- jplaxton00
- jplaxton00
-
-
- 186 Posts
-
Re: WING LEVELER
Hi Rick;
As a follow up to my message above, I may have a Navomatic 300A unit for sale if you are interested. I got it from a guy that removed it from his C-182 in working order. I don't know if I can afford the cost to install it in my 172. I have the computer, the servo, and the turn coordinator. Needs the DG to complete it. Let me know if you are interested.
Jon
- jplaxton00
- jplaxton00
-
-
- 186 Posts
-
Re: WING LEVELER
I may be interested in the 300a if you want to sell...
- Guest
- Guest
-
-
- Posts
-
Re: WING LEVELER
Hi Adam;
I'll let you know. I am trying to get a cost estimate to do the wing modifications and installation. If it is more than I can afford, I'll have to stick with the auto pilot I have (my wife holding the control wheel while I dig through my flight bag).
Jon
- jplaxton00
- jplaxton00
-
-
- 186 Posts
-
Re: WING LEVELER
I have an original (still in the box) Aeortrim for a Cessna. I bought it for my 172 and sold the airplane and kept the Aerotrim. Later I bought a C-182 and it already had an Aerotrim installed. So this one is for sale.
Make an offer.... You can reach me at
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
.
R. B. Jeffrey
- Guest
- Guest
-
-
- Posts
-
Re: WING LEVELER
There is no substitute for AEROTRIM products, dont settle for substandard copies w/out stc pma approval. AEROTRIMINC.com for aileron/rudder trim tab controls and wet wing sealant;AEROSEAL
and AEROTRIM products carry the largest number of stc's and are the only FAA approved repair station for AEROTRIM products
- Guest
- Guest
-
-
- Posts
-
Re: WING LEVELER
Dyersburg Avionics (authorized S-Tec dealer)
ask for Jerrie 573-333-4296
or email at
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
less money more equipment.
- jeffrey.puckett
-
-
- 18 Posts
-
- Index
- » Topic Specific Forums (COO membership required)
- » Avionics
- » WING LEVELER
Board Info
- Board Stats:
- Total Topics:
- 5964
- Total Polls:
- 1
- Total Posts:
- 16301
- Dormant:
- User Info:
- Total Users:
- 2067
- Newest User:
- hgrifo
- Members Online:
- 1
- Guests Online:
- 1389
- Most Active Users:
- Director, jplaxton00, helpdesk, reecedaniel, Cessna Tech, Larry Stanford, Rick Gardner, Bob H, wrbrent, mike11003
- Online:
- Robert J. Reich
Forum Legend:
Topic
New
Locked
Sticky
Active
New/Active
New/Locked
New Sticky
Locked/Active
Active/Sticky
Sticky/Locked
Sticky/Active/Locked