KLN89B Pin Out

KLN89B Pin Out

I recently installed a UBG-16 along with Mux.  It is my understanding that there is a serial output from the KLN89B that I can feed to one of the MUX channels.  It has eight channels and only requires one for the UBG-16.  However, I have been unable to find a schematic that shows the pin out for the KLN89B connectors so I know where to connect the wire.  The local radio shop will gladly run the single wire for $350.  Any help appreciated.

joehopwood
useravatar
Offline
12 Posts
User info in posts
Only registered users or members can reply or post

Re: KLN89B Pin Out

Pin 2 of the 25 pin connector is the RS232 output. You will probably find pin 2 jumpered to pin 1 (the RS232 input) if its not interfaced with any other equipment.

Guest
Guest
useravatar
Offline
Posts
User info in posts
Only registered users or members can reply or post

Re: KLN89B Pin Out

Thanks Denny.  Someone sent me a few pages from the installation manual.  I think I have all I need now to make the connection.  Now to find software that can read it.

joehopwood
useravatar
Offline
12 Posts
User info in posts
Only registered users or members can reply or post

Board Info

Board Stats:
 
Total Topics:
6049
Total Polls:
1
Total Posts:
16361
Total Posts Today:
2
User Info:
 
Total Users:
2570
Newest User:
Acampodonico
Members Online:
1
Guests Online:
1470

Online: 
Acampodonico

Forum Legend:

 Topic
 New
 Locked
 Sticky
 Active
 New/Active
 New/Locked
 New Sticky
 Locked/Active
 Active/Sticky
 Sticky/Locked
 Sticky/Active/Locked

ankara escort ankara rus escort ankara escort bayan ankara bayan partner ankara escort kizlar escort ankara ankara escort ankara eskort ankara escort bayan ankara bayan partner ankara escort kizlar escort ankara